![]() ![]() Put on the cover while not in use to avoid pins damage.Don’t allow children to operate the unit.Do not operate the tool with in the presence of flammable/explosive gases.Please do not remove any labels from the unit.Please read this manual thoroughly before operation.Remove the battery when not in use for an extended period of time.įailure to follow the instructions listed below may cause personal injury.Check the battery regularity, avoid deterioration.Do not operate the tool in the water and dust, avoid to damage the tool.Don’t place the product with corrosive any gas or objects.Don’t disassemble the product to avoid failure.Don’t drop the product or use by force.The best way to recognize the right wood moisture content is to measure continuously day after day to obtain the corresponding values and compare to judge. Wood moisture values are related to ambient temperature humidity and wood material density.Please replace the battery when the unit cannot be powered on or low battery indicator is on.The product has external calibration function Remove the protection cap, power on the unit, place the 2 pins into the 2 holes at the back of the cover, just now the LCD shows a value between 18.2%☐.3% If beyond this range, the accuracy has problem, advise to be repaired. When it is lower than 1.5%, the screen shows” _ _ _”, when it is higher than 33%, the screen shows “ _ _ _ ”.Ħ) Press the Hold button I during measuring, the symbol “HOLD” will display and hold the data, press again to make “HOLD” disappear and exit data hold.ħ) Keeping pressing the Hold button to turn off the buzzer sound during measuring.Ĩ) Keeping pressing the power button for 2s to turn off the product. The screen shows” _ _ _”, when it is higher than 50%, the screen shows “ _ _ _ ”.ĥ) Under building material mode, reading of the target material is displayed on LCD screen, available range is 1.5%~33%.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |